- Hcitaly - ISTI

ACM UMAP 2024 - Call for Late-Breaking Results and Demos

by Wanling Cai

* We apologize if you receive multiple copies of this CfP * * Online version: https://www.um.org/umap2024/call-for-lbr-and-demos/ ACM UMAP 2024 - Call for Late-Breaking Results and Demos ACM UMAP 2024: The 32nd ACM Conference on User Modeling, Adaptation and Personalization Cagliari, Sardinia, Italy July 1-4, 2024 The 32nd International Conference on User Modeling, Adaptation, and Personalization (ACM UMAP 2024) is the premier international conference for researchers and practitioners working on systems that adapt to individual users or groups of users, and that collect, represent, and model user information. ACM UMAP 2024 is sponsored by ACM SIGCHI<https://sigchi.org/> and SIGWEB<https://www.sigweb.org/>. User Modeling Inc.<https://um.org/>, as the core Steering Committee, oversees the conference organization. ACM UMAP operates under the ACM Conference Code of Conduct<https://www.acm.org/about-acm/policy-against-harassment>. The proceedings, published by ACM, will be part of the ACM Digital Library. ACM UMAP 2024 invites Late-Breaking Results (LBR) papers as well as Demonstrations (demos) of innovative UMAP-based systems (including research prototypes). The topics for these submissions are the same as the ones included in the Call for Full and Short Papers<https://www.um.org/umap2024/call-for-full-and-short-papers/>. However, their scope and timing is different. In particular, although short papers (from the main track) and the LBR papers of this call have the same maximum length, LBR papers are expected to present innovative ideas that are being explored and have already shown some promising results. It is also a dissemination channel for new research directions. Mature results which have already gone through experimental validation are more suitable for the general call, either as a full or short paper. Thus, rejected papers from the main track are not expected to be a valuable contribution as an LBR paper unless their contents are revised to address the scope of this track. Note also that LBR papers are to be presented physically during the conference in a poster format, allowing for more informal discussions on the ideas shared. Demos are intended to present systems that have been used to achieve the research outcomes presented as full and short papers. Thus, we highly recommend authors of accepted full and short papers to also prepare a submission for a demo of their system to be showcased at the conference in the LBR and Demo session. ** Important Dates ** Submission: April 18, 2024 Notification: May 9 2024 Camera-ready Submission (TAPS system): May 16, 2024 Conference: July 1 – 4, 2024 Note: The submissions deadlines are at 11:59 pm AoE (Anywhere on Earth)<https://www.timeanddate.com/time/zones/aoe> time. Submission All submissions must be written in English. Papers should be submitted electronically, in a PDF format, through the EasyChair submission system, https://easychair.org/conferences/?conf=umap24, by selecting the “UMAP24 Late Breaking Results and Demo Papers” track ** Length and Formatting ** -- Late-Breaking Results Format -- * Page Limits. Up to 7 pages, plus up to 2 additional pages for references (figures, tables, proofs, appendixes, acknowledgments, and any other content count toward the page limit). * Proceedings. Publication in ACM UMAP 2024 adjunct proceedings. * Presentation. Physically presented as a poster during the conference. * Description. LBRs are research-in-progress that must contain original and unpublished accounts of innovative research ideas, preliminary results, industry showcases, and system prototypes, addressing both the theory and practice of UMAP. In addition, papers introducing recently started research projects or summarizing project results are welcome as well. We encourage researchers and practitioners to submit late-breaking work as it provides a unique opportunity for sharing valuable ideas, eliciting useful feedback on early-stage work, and fostering discussions and collaborations among colleagues. In case that papers rejected in the main track (i.e. submitted as full or short papers) are submitted to this track, they should be revised not only to take into account the comments made to help improve the paper, but to fulfill the scope of the LBR, which emphasizes novelty of ideas. This is also valid for papers that have been recommended as an LBR when rejected in the main track. -- Demos Format -- * Page Limits *. Up to 5 pages, plus up to 1 additional page for references (figures, tables, proofs, appendixes, acknowledgments, and any other content count toward the page limit). On an extra page (not to be published), submissions should include a specification of the technical requirements for demonstrating the system at UMAP 2024. * Supporting Material *. Video or external material demonstrating the system. * Proceedings *. Publication in ACM UMAP 2024 adjunct proceedings. * Presentation * . Physically presented as a demo plus as a poster during the conference. * Description *. Demos will showcase research prototypes and commercially available products in a dedicated session. Demo submissions must be based on an implemented and tested system that pursues one or more innovative ideas in the interest areas of the conference. Demonstrations are an excellent and exciting way to showcase implementations and get valuable feedback from the community, especially for those papers that have been presented in the main track. Each demo submission must make clear which aspects of the system will be demonstrated, and how these will be demonstrated on-site as well as online. To better identify the value of demos, we also encourage authors to submit a pointer to a screencast (max. 5 minutes on Vimeo or YouTube) or any external material related to the demo (e.g., shared code on GitHub). Non-Anonymity. Submissions will be reviewed single-masked (i.e., authors’ names should be included in the papers) thus there is no need to be anonymized before submission. Template for the Research Description. Following the ACM Publication Workflow<https://www.acm.org/publications/taps/word-template-workflow>, all authors should submit manuscripts for review in the new ACM single-column format. Instructions for authors are given below: * LaTeX (use \documentclass[manuscript, review, anonymous]{acmart} in the sample-authordraft.tex file for single-column). Please carefully follow the ACM’s instructions for preparing your article with LaTeX<https://authors.acm.org/proceedings/production-information/preparing-your-a…>. * Overleaf (use \documentclass[manuscript,review,anonymous]{acmart} for single-column). Please carefully follow the ACM’s instructions for preparing your article with Overleaf<https://authors.acm.org/proceedings/production-information/overleaf>. * Word. Please carefully follow the ACM’s instructions for preparing your article with Microsoft Word<https://authors.acm.org/proceedings/production-information/preparing-your-a…> Should you have any questions or issues going through the instructions above, please contact support at acmtexsupport(a)aptaracorp.com<mailto:acmtexsupport@aptaracorp.com> for LaTeX and Microsoft Word inquiries. * Accessibility *. Authors are strongly encouraged to provide “alt text” (alternative text) for floats (images, tables, etc.) in their content so that readers with disabilities can be given descriptive information for these floats that are important to the work. The descriptive text will be displayed in place of a float if the float cannot be loaded. This benefits the author and it broadens the reader base for the author’s work. Moreover, the alt text provides in-depth float descriptions to search engine crawlers, which helps to properly index these floats. Additionally, authors should follow the ACM Accessibility Recommendations for Publishing in Color and SIG ACCESS guidelines on describing figures<https://authors.acm.org/journals/accessibility-recommendations-for-publishi…>. ** Review Process & Camera-ready Submission ** * Review * Submissions will be reviewed by at least two independent reviewers. They will be assessed based on their originality and novelty, potential contribution to the research field, potential impact in particular use cases, and the usefulness of presented experiences, as well as their overall readability. Papers that exceed the page limits or do not adhere to the formatting guidelines will be returned without review. The ACM Code of Ethics<https://ethics.acm.org/> gives the UMAP program committee the right to (desk-)reject papers that perpetuate harmful stereotypes, employ unethical research practices, or uncritically present outcomes/implications that clearly disadvantage minority communities. Further, reviewers will be explicitly asked to consider whether the research was conducted in compliance with professional ethical standards and applicable regulatory guidelines. Failure to do so could lead to a (desk-)rejection. * Camera-ready Information *. Accepted papers will be subject to further revision to meet the requirements of the camera-ready format required by ACM. We strongly recommend the usage of LaTeX/Overleaf for the camera-ready papers to minimize the extent of reformatting. Users of the Word template must use either the version for Microsoft Word for Windows, Macintosh Office 2011, or Macintosh Office 2016 (other formats such as Open Office, etc., are not admitted) for the camera-ready submission to avoid incompatibility issues. Instructions for preparing the camera-ready versions of accepted papers will be provided after acceptance. This might include instructions to prepare a video of the accepted contribution. Camera-ready versions of accepted papers will be later submitted using ACM’s new production platform<https://www.acm.org/publications/proceedings-template> where authors will be able to review PDF and HTML output formats before publication. ** Registration and Presentation Policy ** Each accepted paper must be accompanied by a distinct full author registration, completed by the early registration date cut-off. Each accepted paper must be presented in person to be included in the conference adjunct proceedings, published by ACM and available via the ACM Digital Library. The official publication date is when the proceedings are made available in the ACM Digital Library. This date may be up to two weeks before the first day of UMAP 2024. The official publication date affects the deadline for any patent filings related to published work. During the conference, all categories will be presented at the poster reception, in the form of a poster and/or a software demonstration following poster format. This form of presentation will provide presenters with an opportunity to obtain direct feedback about their work from a wide audience during the conference. ** Late-Breaking Results and Demos Chairs ** * Bamshad Mobasher, DePaul University, USA * Hanna Hauptmann, Utrecht University, Netherlands * Olga C. Santos, Universidad Nacional de Educacion a Distancia (UNED), Spain Contact information: umap2024-lbr at um.org

2 years, 1 month

1
0
0 0

ACM UMAP 2024 - 2nd Call for Workshop Proposals

by Wanling Cai

* We apologize if you receive multiple copies of this CfP * * Online version: https://www.um.org/umap2024/call-for-workshop/ ACM UMAP 2024 - Call for Workshop Proposals ACM UMAP 2024: The 32nd ACM Conference on User Modeling, Adaptation and Personalization Cagliari, Sardinia, Italy July 1-4, 2024 The 32nd International Conference on User Modeling, Adaptation, and Personalization (ACM UMAP 2024) is the premier international conference for researchers and practitioners working on systems that adapt to individual users or groups of users, and that collect, represent, and model user information. ACM UMAP 2024 is pleased to invite proposals for workshops to be held in conjunction with the conference. The workshops will provide a venue to discuss and explore key emerging areas of user modeling, recommender systems and adaptive hypermedia research, among others, with a group of like-minded researchers and practitioners from industry and academia. Please consult the ACM UMAP 2024 general call for full and short papers<https://www.um.org/umap2024/call-for-full-and-short-papers/> concerning the key topics of this call as well. In this edition, our goal is to have a balanced workshop program, comprising different workshop formats and combining newly emerging, currently evolving, and established research topics. Workshops are encouraged to be as dynamic and interactive as possible. Different full-day and half-day workshop schemas are possible, such as: * Working group meetings around a specific problem or topic where participants are asked to submit a white paper or position statement. * Traditional mini-conferences on key, emerging, specialized topics, having their own paper submission and review processes. * Mini-competitions or research challenges around selected topics, with either individual or team participation and their own evaluation processes * Interactive discussion meetings focusing on subtopics of the main conference general tracks, with interactivity and engagement in mind. * Joint panels aiming to synthesize insights from diverse perspectives by bringing together experts from different workshops or sessions. ** Important Dates ** * Workshop Proposal Submission: January 11, 2024 * Notification: February 1, 2024 * Workshop Description & Website URL Submission: February 24, 2024 * Workshop Summary Camera-ready Submission (TAPS system): May 16, 2024 * Workshop Day: July TBD, 2024 (it will happen in one of the conference days) We strongly encourage the organizers of accepted workshops to diligently follow the suggested deadlines in the schedule for the authors of workshop papers: * (Suggested) 1st Call for Workshop Papers: February 28, 2024 * (Suggested) 2nd Call for Workshop Papers: April 13, 2024 * (Suggested) Workshop Paper Submission: April 24, 2024 * (Suggested) Notification: May 8, 2024 * (Mandatory) Workshop Papers Camera-ready Submission (TAPS system): May 16, 2024 These dates are synchronized with the notification of paper acceptance in the main conference track, and the availability of early registration for the authors of accepted workshop papers. Note: The submissions deadlines are at 11:59 pm AoE (Anywhere on Earth)<https://www.timeanddate.com/time/zones/aoe> time. ** Submission ** All workshop proposals must be written in English. Proposals should be submitted electronically, in a PDF format, through the EasyChair submission system, https://easychair.org/conferences/?conf=umap24, by selecting the “UMAP24 Workshop and Tutorial Proposals” track. ** Length and Formatting ** *Format*: Each proposal should be arranged into a single PDF document, not exceeding 5 pages (references included). *Template*: Following the ACM Publication Workflow<https://www.acm.org/publications/taps/word-template-workflow>, the proposal should be arranged based on the new ACM single-column format. Instructions for the organizers are given below: * LaTeX (use \documentclass[manuscript, review, anonymous]{acmart} in the sample-authordraft.tex file for single-column). Please carefully follow the ACM’s instructions for preparing your article with LaTeX<https://authors.acm.org/proceedings/production-information/preparing-your-a…>. * Overleaf (use \documentclass[manuscript,review,anonymous]{acmart} for single-column). Please carefully follow the ACM’s instructions for preparing your article with Overleaf<https://authors.acm.org/proceedings/production-information/overleaf>. * Word. Please carefully follow the ACM’s instructions for preparing your article with Microsoft Word<https://authors.acm.org/proceedings/production-information/preparing-your-a…> Should you have any questions or issues going through the instructions above, please contact support at acmtexsupport(a)aptaracorp.com<mailto:acmtexsupport@aptaracorp.com> for LaTeX and Microsoft Word inquiries. *Structure*: Each proposal is expected to include the following information: * Workshop title and acronym. * Workshop chair(s), including, for each organizer, their affiliation, main email address, website link, and experiences in organizing such events. Note that organizers are expected to attend the workshop and be actively involved in its organization. * Abstract (up to 300 words) and topics of interest. * Keywords (at least 3). * Motivation on why the workshop is of particular interest at this time and how it complements (rather than duplicates) the topics of the main conference. * Workshop format, particularly discussing the mix of expected events, such as paper presentations, invited talks, panels, and general discussions. * Short description of the intended audience and the expected number of participants, including how they will be selected. * List of (potential) members of the program committee (at least 50% have to be confirmed at the time of the proposal). The program committee is mandatory. * Requested duration (half day or full day). * When available, past editions of the workshop, including their website URLs, a brief statement on the development of the workshop series, e.g., in terms of topics, number of paper submissions and participants, post-workshop publications over the years and acceptance statistics. * If this would be the first edition of the workshop, a description of how this workshop differs from others on the same or similar topics (include conference name and year). * Any other relevant information to support your proposal. ** Instructions ** *Support*: We encourage both researchers and industry practitioners to submit workshop proposals. Researchers interested in submitting a workshop proposal are invited to contact us in advance, so we can help to design successful proposals. In particular, for workshop proposals with novel interactive formats, we are happy to assist in further developing and implementing the ideas. *Diversity*: We strongly suggest involving organizers from different institutions, bringing their different perspectives to the workshop topic. We welcome workshops with a creative structure that may attract various types of participants and may ensure rich interactions. *Expectations*: The organizers of accepted workshops are expected to set up a webpage for the workshop including detailed information about the workshop organization and timeline, disseminate a call for papers, a call for participation, select reviewers, and gather reviews before selecting the final program. They will be responsible for their own publicity and reviewing processes. *Proceedings*: There will be conference adjunct proceedings published by ACM, and available via the ACM Digital Library. A camera-ready summary of the workshop should be written by the organizers to be included in these adjunct proceedings. Moreover, all workshop papers will be published in the same proceedings. Hence, the workshop organizers will need to make sure that the authors of workshop papers adhere to the adjunct proceedings publication timeline. *Camera-ready Information*: Accepted summaries/papers will require a further revision in order to meet the requirements and the page limits of the camera-ready format required by ACM. Instructions for the preparation of the camera-ready versions of the summaries/papers will be provided after acceptance. We strongly recommend the usage of LaTeX/Overleaf for the camera-ready papers to minimize the extent of reformatting. Users of the Word template must use either the version for Microsoft Word for Windows, Macintosh Office 2011, or Macintosh Office 2016 (other formats such as Open Office, etc., are not admitted) for the camera-ready submission to avoid incompatibility issues. ** Registration and Presentation Policy ** Each accepted workshop summary must be accompanied by a distinct full author registration, completed by the early registration date cut-off. Each workshop has to be run by all organizers. Therefore, each workshop organizer must be registered (at least 25% in person, the remaining online). Each accepted workshop summary will be included in the conference adjunct proceedings. The official publication date is when the proceedings are made available in the ACM Digital Library. This date may be up to two weeks before the first day of UMAP 2024. The official publication date affects the deadline for any patent filings related to published work. Each accepted workshop paper must be accompanied by a distinct full author registration, completed by the early registration date cut-off. Each accepted workshop paper can be presented either in person or online and will be included in the conference adjunct proceedings. The official publication date is when the proceedings are made available in the ACM Digital Library. This date may be up to two weeks before the first day of UMAP 2024. The official publication date affects the deadline for any patent filings related to published work. ** Workshop Chairs ** * Amra Delic, University of Sarajevo, Bosnia and Herzegovina * Eelco Herder, University of Utrecht, The Netherlands * Noemi Mauro, University of Turin, Italy Contact information: umap2024-wt at um.org

2 years, 1 month

1
0
0 0

ACM UMAP 2024 - 2nd Call for Tutorial Proposals

by Wanling Cai

* We apologize if you receive multiple copies of this CfP * * Online version: https://www.um.org/umap2024/call-for-tutorial/ ACM UMAP 2024 - Call for Tutorial Proposals ACM UMAP 2024: The 32nd ACM Conference on User Modeling, Adaptation and Personalization Cagliari, Sardinia, Italy July 1-4, 2024 The 32nd International Conference on User Modeling, Adaptation, and Personalization (ACM UMAP 2024) is the premier international conference for researchers and practitioners working on systems that adapt to individual users or groups of users, and that collect, represent, and model user information. ACM UMAP 2024 is pleased to invite proposals for tutorials to be given in conjunction with the conference. Tutorials are expected to be instructional sessions aimed to provide a comprehensive introduction to established or emerging research topics of interest for the UMAP community. An ideal tutorial should be broad enough to provide a basic introduction to the chosen area, but it should also cover the most important topics in depth. Tutorials are encouraged to be as dynamic and interactive as possible. Example topics of interest include, but are not limited to: * User modeling in the era of generative artificial intelligence. * Responsible user modeling and personalization. * Effective evaluation of personalized applications. * Strategies to let users be in control of the personalization process. Tutorial presenters can have 4 pages + 1 for references in the adjunct proceedings. ** Important Dates ** Tutorial Proposal Submission: January 11, 2024 Notification: February 1, 2024 Tutorial Description & Website URL Submission: February 24, 2024 Tutorial Summary Camera-ready Submission (TAPS system): May 16, 2024 Note: The submission deadlines are at 11:59 pm AoE (Anywhere on Earth)<https://www.timeanddate.com/time/zones/aoe> time. ** Submission ** All tutorial proposals must be written in English. Proposals should be submitted electronically, in a PDF format, through the EasyChair submission system, https://easychair.org/conferences/?conf=umap24, by selecting the “UMAP24 Workshop and Tutorial Proposals” track. ** Length and Formatting ** *Format*. Each proposal should be arranged into a single PDF document, not exceeding 5 pages (references included). *Template*. Following the ACM Publication Workflow<https://www.acm.org/publications/taps/word-template-workflow>, the proposal should be arranged based on the new ACM single-column format. Instructions for the organizers are given below: * LaTeX (use \documentclass[manuscript, review, anonymous]{acmart} in the sample-authordraft.tex file for single-column). Please carefully follow the ACM’s instructions for preparing your article with LaTeX<https://authors.acm.org/proceedings/production-information/preparing-your-a…>. * Overleaf (use \documentclass[manuscript,review,anonymous]{acmart} for single-column). Please carefully follow the ACM’s instructions for preparing your article with Overleaf<https://authors.acm.org/proceedings/production-information/overleaf>. * Word. Please carefully follow the ACM’s instructions for preparing your article with Microsoft Word<https://authors.acm.org/proceedings/production-information/preparing-your-a…>. Should you have any questions or issues going through the instructions above, please contact support at acmtexsupport(a)aptaracorp.com<mailto:acmtexsupport@aptaracorp.com> for LaTeX and Microsoft Word inquiries. *Structure*. The proposal should include the following information: * Title and abstract of the tutorial (200 words maximum). * Tutorial description: Learning objectives of the tutorial and relevance to ACM UMAP 2024. Targeted audience (introductory, intermediate, advanced) and prerequisite knowledge or skills. Brief outline of the tutorial structure. Brief description of the practical sessions. * Tutorial length (ideally 1 hour and a half). * Other venues to which the tutorial or part thereof has been or will be presented, in addition to explaining how the current tutorial differs from the other editions, and from other tutorials on the same or similar topics (please specify conference name and year). * Name, email address, affiliation and brief professional biography of each tutorial organizer, indicating previous training and speaking experience. *Evaluation Criteria*. All proposals will be reviewed by the ACM UMAP 2024 Tutorial Chairs. The features that will be evaluated are: * ability of the tutorial to contribute to strengthening the foundations of UMAP research. * clarity of the tutorial, which should emerge from its description. * good organization, as appearing from the outline. * the value of any materials released with the tutorial for the community. * background/experience of tutorial instructor(s) in teaching the target topics. ** Instructions ** *Support*. We encourage both researchers and industry practitioners to submit tutorial proposals. Researchers interested in submitting a tutorial proposal are invited to contact us in advance, so we can help to design successful proposals. In particular, for tutorial proposals with novel interactive formats, we are happy to assist in further developing and implementing the ideas. *Diversity*. We strongly suggest involving organizers from different institutions, bringing their different perspectives to the tutorial topic. We welcome tutorials with a creative structure that may attract various types of participants and may ensure rich interactions. *Expectations*. The organizers of accepted tutorials are expected to set up a webpage for the tutorial including detailed information about the tutorial organization and timeline, and disseminate a call for participation. They will be responsible for their own publicity. *Proceedings*. There will be conference adjunct proceedings published by ACM, and available via the ACM Digital Library. A camera-ready summary of the tutorial should be written by the organizers to be included in these adjunct proceedings. *Camera-ready Information*. Accepted summaries will require a further revision in order to meet the requirements and the page limits of the camera-ready format required by ACM. Instructions for the preparation of the camera-ready versions of the summaries will be provided after acceptance. We strongly recommend the usage of LaTeX/Overleaf for the camera-ready papers to minimize the extent of reformatting. Users of the Word template must use either the version for Microsoft Word for Windows, Macintosh Office 2011, or Macintosh Office 2016 (other formats such as Open Office, etc., are not admitted) for the camera-ready submission to avoid incompatibility issues. ** Registration and Presentation Policy ** Each accepted tutorial summary must be accompanied by a distinct full author registration, completed by the early registration date cut-off. Each tutorial has to be run by all organizers. Therefore, each tutorial organizer must be registered (at least 25% in person, the remaining online). Each accepted tutorial summary will be included in the conference adjunct proceedings. The official publication date is when the proceedings are made available in the ACM Digital Library. This date may be up to two weeks before the first day of UMAP 2024. The official publication date affects the deadline for any patent filings related to published work. ** Tutorial Chairs ** * Amra Delic, University of Sarajevo, Bosnia and Herzegovina * Eelco Herder, University of Utrecht, The Netherlands * Noemi Mauro, University of Turin, Italy Contact information: umap2024-wt at um.org

2 years, 1 month

1
0
0 0

VL/HCC 2024 - Call for Workshops and Tutorials

by Dulaji Hidellaarachchi

Dear colleagues and researchers, We're excited to announce the opportunity to submit workshop and tutorial proposals for the upcoming IEEE Symposium on Visual Languages and Human-Centric Computing (VL/HCC) 2024. This year, VL/HCC 2024 is focused on the intersection of human-centric computing and Generative AI, under the special theme of “VL/HCC and Generative AI”. We invite proposals for half-day or full-day sessions centered around topics such as (but not limited to) end-user programming, visual languages, domain-specific languages, software visualization, and CS education. Your innovative ideas and unconventional formats are welcomed and valued. Accepted workshops may have the chance to publish their proceedings in the VL/HCC accompanying volume by IEEE CPS. To encourage participation, we aim to maintain affordable registration fees, expected to be around £100. For detailed submission guidelines and further information, please visit our website: https://conf.researchr.org/track/vlhcc-2024/vlhcc-2024-workshops-and-tutori… Looking forward to your creative proposals! Warm regards, Dulaji Hidellaarachchi Publicity & Social media Chair On behalf of VL/HCC organising committee VL/HCC’2024 ---------------------------------------------------------- *Dulaji Hidellaarachchi* * | Research Fellow* * | Department of Software Systems and Cybersecurity* * | Faculty of Information Technology* * | Monash University* * | Clayton VIC 3800* * | Australia * E: Dulaji.Hidellaarachchi(a)monash.edu https://dulajih.com <https://www.dulajih.com/>

2 years, 1 month

1
0
0 0

CfP AVI 2024 Advanced Visual Interfaces - 1st Call for Posters and Demos

by BIANCARDI Beatrice

CfP AVI 2024 Advanced Visual Interfaces - 1st Call for Posters and Demos ACM in-cooperation Conference on Advanced Visual Interfaces ================================================= 3-7 June 2024 Genoa, Italy https://avi2024.dibris.unige.it<https://avi2024.dibris.unige.it/> ================================================= IMPORTANT DATES Posters and Demo papers: · Thursday, February 29, 2024 (23:59, AoE) REMINDER and NOTICE for Long and short papers: - Abstract submission: Wednesday, January 10, 2024 (23:59, AoE) - Paper submission: Wednesday, January 17, 2024 (23:59, AoE) Submission webpage: https://easychair.org/conferences/?conf=avi2024 --------------------------------------------------------------------------- International Conference on Advanced Visual Interfaces (AVI) Since 1992, AVI has been a biennial appointment for a vast international community of experts with a broad range of backgrounds. Throughout three decades, the Conference has attracted leading researchers of Human-Computer Interaction (HCI) from all over the world, offering a forum to present and disseminate new technological results, paradigms, and visions for HCI and user interfaces. Because of advanced technology and new possibilities for user interaction, AVI has broadened the topics it covers, still keeping its primary focus on the conception, design, implementation, and evaluation of novel visual interfaces. AVI 2024 is under the patronage of University of Genoa, Department of Informatics, Bioengineering, Robotics and Systems Engineering, Italy and is held in-cooperation with ACM, SIGCHI, SIGMM, SIGWEB. We look forward to your participation in AVI 2024! Cristina Conati, AVI 2024 General Chair Gulatiero Volpe, AVI 2024 General Chair Ilaria Torre, AVI 2024 Program Chair --------------------------------------------------------------------------- TOPICS Topics of interest include (but are not limited to) the following: Adaptive and Context-Aware Interfaces Affective Interfaces and Interaction Computer Supported Cooperative Work Embodied Conversational Interfaces Full-body Interaction and Nonverbal Behavior Human-AI Interaction Information Visualization Intelligent Interfaces Engineering of Visual Interfaces and Interaction Interaction Design Tools Building Interactions: Hardware, Materials, and Fabrication Interaction for the environment and environmental awareness Interface Metaphors Interfaces for Automotive Interfaces for Big Data Interfaces for e-Commerce and e-Branding Interfaces for e-Culture and e-Tourism Interfaces for End-User Development Interfaces for entertainment Interfaces for Recommender Systems Interfaces for Social Interaction and Cooperation Interfaces and Interactions for Persuasion and Behaviour Change Interfaces and Interactions for Inclusion, Accessibility and Aging Interfaces and interactions for usable security Interfaces for Children Interfaces for well-being and flourishing Interfaces for Learning, Education, and Families Mobile Interaction Motion-based Interaction Multimodal Interfaces (Multi)Sensory Interfaces (Multi)Touch Interaction Search Interfaces Shape-Changing Devices Sonification User Interfaces for the Internet of Things Usability and Accessibility Virtual and Augmented Reality Visual Analytics Technical demonstrations developed in context of artistic/cultural activities (e.g., elements of museum exhibits or dance performances) POSTER PAPERS The AVI 2024 Poster Track provides researchers and practitioners with the opportunity of presenting contributions which are work-in-progress and obtaining precious feedback from their peers in an informal setting. Poster submissions must be up to 2 pages (with one additional page for references), not anonymized. DEMO PAPERS The demo track is intended to provide a forum to showcase innovative implementations, systems and technologies demonstrating new ideas about interactive visual interfaces. We are looking for implementations of novel and exciting concepts or systems related to the main topics of AVI. We are especially keen to welcome innovative demonstrations from industry and startups that are closely aligned with the conference core themes. We encourage the emergent innovators interested to demonstrate their solutions even at an early stage of development to submit the papers to this call. Demo papers must be up to 2 pages (with one additional page for references), not anonymized. Demo submissions need to be complemented by a document that describes technical requirements (the template can be downloaded from the website<https://avi2024.dibris.unige.it/calls/posters-demos>). Please notice that: · The committee reserves the right to reject proposals whose hardware and/or space requirements cannot be met by organizers (if you have any doubt please contact the demo chairs<mailto:avi2024demos@easychair.org> before submitting the paper). The organizers cannot provide any specific equipment (e.g., sound or lighting systems). · In no case does a demonstration involve any remuneration from conference organizers. SUBMISSION FORMAT All the papers mentioned above, i.e., posters and demos, require online submission. Authors must format submissions according to the ACM SIGCONF template. Please find the templates below: · Latex for Overleaf: https://www.overleaf.com/latex/templates/association-for-computing-machiner… · Word Template: https://www.acm.org/publications/proceedings-template Papers must be submitted online on EasyChair https://easychair.org/conferences/?conf=avi2024 PROCEEDINGS Since 1994, accepted long and short research papers are included in the Proceedings published by ACM Press and available in the ACM Digital Library. For each accepted paper, at least one author must register to AVI 2024 by the early registration deadline for authors, pay the registration fee and present the paper at the Conference. --------------------------------------------------------------------------- AVI 2024 ORGANIZING COMMITTEE General Chairs Cristina Conati, University of British Columbia, Vancouver Gualtiero Volpe, University of Genoa Program Chair Ilaria Torre, University of Genoa Long Papers Chairs Giuseppe Desolda, University of Bari Michail Giannakos, Norwegian University of Science and Technology Short Papers Chairs Elisabetta Bevacqua, National Engineering School of Brest Maurizio Mancini, Sapienza University of Rome Workshop & Tutorial Chairs Ignacio Aedo, Universidad Carlos III de Madrid Rosella Gennari, Free University of Bozen-Bolzano Poster Chairs Masood Masoodian, Aalto University Giovanna Varni, University of Trento Demo Chairs Radoslaw Niewiadomski, University of Genoa Fabiana Vernero, University of Turin Doctoral Consortium Chair Fabio Paternò, CNR ISTI Giuliana Vitiello, University of Salerno Publicity Chairs Beatrice Biancardi, LINEACT CESI Federica Delprino, University of Genoa Proceedings Chairs Eleonora Ceccaldi, University of Genoa Cigdem Beyan, University of Trento Web Chair Paola Barra, University of Naples Parthenope AVI STEERING COMMITTEE Paolo Bottoni, Sapienza University of Rome, Italy Paolo Buono University of Bari, Italy Tiziana Catarci Sapienza University of Rome, Italy Maria Francesca Costabile University of Bari, Italy Maristella Matera Polytechnic of Milan, Italy Massimo Mecella Sapienza University of Rome, Italy Kent Norman University of Maryland, USA Emanuele Panizzi, Sapienza University of Rome, Italy Genny Tortora University of Salerno, Italy Giuliana Vitiello University of Salerno, Italy Marco Winckler Université Côte d'Azur, France ) --------------------------------------------------------------------------- @avi2024conference (https://www.facebook.com/avi2024conference/) @avi2024conference (https://www.instagram.com/avi2024conference/) @avi2024conf (https://twitter.com/avi2024conf) @avi2024conference https://www.linkedin.com/company/avi2024conference/) [cid:image007.png@01DA3439.BC1601B0] Beatrice BIANCARDI Enseignante-Chercheure LINEACT CESI bbiancardi(a)cesi.fr<mailto:bbiancardi@cesi.fr> https://sites.google.com/view/beatricebiancardi/home Tel : +33 (0)6 71 62 50 45 93 boulevard de La Seine CS 40177 - 92006 Nanterre cedex [cid:image008.png@01DA3439.BC1601B0]<https://www.facebook.com/CESIingenieurs> [cid:image009.png@01DA3439.BC1601B0]<https://twitter.com/cesi_officiel> [cid:image010.png@01DA3439.BC1601B0]<https://www.youtube.com/user/groupecesi1/> [cid:image011.png@01DA3439.BC1601B0]<https://www.linkedin.com/school/cesi-officiel/> [cid:image012.png@01DA3439.BC1601B0]<https://www.instagram.com/cesi_officiel/> cesi.fr<https://www.cesi.fr/>

2 years, 1 month

1
0
0 0

12th IEEE International Conference on Cloud Engineering (IC2E), https://conferences.computer.org/IC2E/2024/, Paphos, Cyprus (Sept. 24-27, 2024)

by Announce

CfP: 12th IEEE International Conference on Cloud Engineering (IC2E), https://conferences.computer.org/IC2E/2024/, Paphos, Cyprus (Sept. 24-27, 2024) The IEEE International Conference on Cloud Engineering (IC2E) is a premier conference on Cloud Computing, which in the last two decades has significantly changed the way IT resources are consumed. ###IMPORTANT DATES### * Abstract submission deadline: April 12, 2024 (AoE) * Full and short paper submission deadline: April 19, 2024 (AoE) * Author notification and start of shepherding phase: June 30, 2024 * Camera-ready copies: August 2, 2024 ###TOPICS OF INTEREST### IC2E provides a high-quality, comprehensive forum where researchers and practitioners can exchange information on engineering principles, enabling technologies, and practical experiences related to Cloud Computing. The conference brings together experts who work on different levels of the cloud stack – including systems, storage, networking, platforms, databases, applications, and software engineering. IC2E offers an end-to-end view of the challenges and technologies in Cloud Computing, fosters new research that addresses the interaction between different layers of the stack, and ultimately helps shape the future of cloud-transformed business and society. IC2E 2024 invites submissions of high-quality research papers describing fully developed results and ongoing foundational and applied work related to all aspects of cloud engineering. The IC2E Program Committee will interpret “cloud engineering” very broadly – to include everything from engineering principles to practical experiences, and advances that target different levels of the cloud stack, from both academia and industry. In particular, submissions on topics of emerging interest in the research and development communities are encouraged. Authors can choose to submit their papers under either the Research and Vision or Industry and Experience Track. Submissions are invited on the following non-exhaustive list of topics for both tracks: * Cloud management and engineering, from single (micro-)services to complete system landscapes * Cloud applications, ranging from the Internet of Things (IoT) over Big Data to Machine Learning * Cloud systems, including storage, data distribution, and serverless computing * Cloud security and privacy concerns on all levels of the Cloud stack * Fog and Edge Computing, and all other system types in the Cloud-Edge Compute Continuum * Everything as a Service * Non-technical aspects of Cloud Computing, e.g., Cloud governance or cloud economics For a full list of the topics, please visit https://conferences.computer.org/IC2E/2024/. IC2E is looking for the following three types of paper submissions: * Research papers describe original well-evaluated research. Novelty is a key criterion in the review process. * Vision papers describe speculative but well-reasoned and inspiring papers. Here, the insights and clarity of the vision are of key concern. * Industry and experience papers describe how existing research has been transferred into practice. The review focus is on the lessons learned, including those relevant for researchers. Research and vision papers should be submitted to the Research Track, industry and experience papers to the Industry Track. Vision papers should have "(Vision Paper)" as a subtitle on the first page. ###SUBMISSION### Authors must submit full and short papers in PDF via the Web submission form at EasyChair (https://easychair.org/conferences/?conf=ic2e2024), upon selecting Research Track or Industry Track options. Both Research Track and Industry Track papers should use the IEEE Manuscript Template for Conference Proceedings for formatting. LaTeX users must use \documentclass[10pt,conference]{IEEEtran}, without including the compsoc or compsocconf options. As reviewers often ask for additional content, IC2E differentiates between paper formatting for reviewing and for the final published version: * Full papers: For reviewing, full papers (including figures and tables) should not exceed 9 double-column pages; references can be additional pages. For the final published version, full papers are limited to a total of 12 double-column pages including everything. * Short papers: For reviewing, short papers are limited to 5 pages, not including references, and should be clearly marked as such in the title. For the final published version, short papers are limited to 8 pages, including everything. IC2E supports Open Science practices. Therefore, authors are strongly encouraged to publish software and data sets as open-source/data. All submitted manuscripts will be peer-reviewed. Depending on the paper type, submissions will be judged on correctness, originality, technical strength, significance, quality of presentation, and interest and relevance to the conference scope. Submitted manuscripts must contain original contributions, and their contributions must not have appeared in or be under consideration for publication in another workshop, conference, or journal. Accepted papers will be published by the IEEE Computer Society Conference Publishing Services (EI indexed). ###ORGANIZATION & CONTACT### General Chairs: * George Pallis University of Cyprus, Cyprus * Weisong Shi University of Delaware, US TPC Chairs: * Xiaohui (Helen) Gu North Carolina State University, US * Stefan Schulte Hamburg University of Technology, Germany

2 years, 1 month

1
0
0 0

Inaugural Workshop of the ACM-SIGCHI Mediterranean Committee (MedCHI)

by Giuliana VITIELLO

Care Tutte e cari Tutti, Sono lieta di annunciare il workshop inaugurale del ACM-SIGCHI Mediterranean Committee, che si terrà il prossimo febbraio al Politecnico di Milano, in concomitanza con il SIGCHI Futures Summit. A nome del Comitato, incoraggio la comunità italiana dell'HCI a inviare contributi di ricerca che valorizzino la cultura mediterranea. Il workshop ha il supporto di ACM SIGCHI e sono certa che la partecipazione a questo evento sarà l'occasione per costruire/ consolidare collaborazioni con gruppi di ricerca degli altri paesi coinvolti. Nel ringraziare Maristella Matera e il Politecnico di Milano per l'ospitalità, spero di vedervi numerosi. Approfitto per augurare a tutti voi e alle vostre famiglie un sereno Natale e un meraviglioso 2024, Giuliana **Call for Contributions** **Inaugural Workshop of the ACM-SIGCHI Mediterranean Committee (MedCHI)** We are excited to announce the first public gathering of the newly established ACM-SIGCHI Mediterranean Committee (MedCHI) coinciding with the SIGCHI Futures Summit ( https://medium.com/sigchi/the-sigchi-futures-summit-93728c1b8634). This workshop marks the beginning of MedCHI's journey, an initiative promoted by ACM SIGCHI aiming to unite and inspire HCI professionals and enthusiasts across the Mediterranean. **We Invite Your Insights and Innovations** Researchers and practitioners from the Mediterranean regions are warmly invited to contribute to this seminal event. We seek submissions that showcase your unique research, projects, and initiatives in Human-Computer Interaction (HCI). **Themes that Resonate with the Mediterranean Region** We encourage contributions that reflect the rich values of the Mediterranean region, including but not limited to Cultural Heritage, Culture, Food, Tourism, Engagements with local user communities **Share Your Success Stories** We also welcome submissions that align with the broader theme of fostering collaboration across diverse communities to strengthen HCI research and practice in the Mediterranean. Your contributions can range from academic research to industry initiatives, including: - Innovative best practices - Highlights of successful events - Impactful academic or industry collaborations - Educational activities, like summer schools and courses - Demonstrations of innovative technologies **A Platform for strengthening HCI in the Mediterranean** This event is not just a meeting point but a starting point for meaningful connections and collaborative endeavors in the Mediterranean HCI community. We look forward to discovering your contributions and collectively shaping the future of HCI in the Mediterranean. We encourage contributions from all, young researchers and senior experts alike, as long as they represent the vibrancy and diversity of HCI work in the Mediterranean region. **Submission Guidelines and Process:** - Submissions should be a reflection or manifesto AND a poster. - Use the EasyChair platform for submission ( https://easychair.org/conferences/?conf=medchi24). - Upon selection, participants are required to deliver a concise 5-minute presentation summarizing their work and engage in a traditional poster session, with interactive discussions with the “SIGCHI Futures Summit” participants. Remote participation will be allowed, but we solicit authors to plan to attend the workshop physically. **Additional Submission Details:** - Utilize the ACM Master Article Submission Template or opt for a free format for the reflection or manifesto. Maximum length: 2000 words. - The poster should be in A1 format. - Your submission should: 1. Describe your HCI-related contribution (purpose, inspirations, successes/failures, strengths/limitations). 2. Explain your interest in the workshop. 3. Detail how your unique positionality, experience, or background can enrich the MedCHI community. **Supplementary Material (Optional):** - Create a promotional video (max 5 minutes) to showcase your work and contribution to MedCHI. These videos will be featured on the workshop website for pre- and during-event engagement. **Important Dates:** - January 14, 2023, AOE: Deadline for Submissions - January 21, 2023: Notification of Acceptance - February 12, 2023: Deadline for Submission of Presentation Slides - February 14, 2023: Workshop held at Politecnico di Milano, Milan, Italy **Selection Criteria:** We aim to represent a broad spectrum of practices, materials, backgrounds, and concerns. Therefore, submissions will be selected based on quality, relevance, and diversity. **Participation Requirements:** - Upon acceptance, at least one author of each paper must attend the workshop (either in person or virtually). **Publication** - Workshop outcomes will be shared via our website - Selected and revised contributions will be considered for a special issue to be published in the IxD&A journal ( http://interfacce.mifav.uniroma2.it/inevent/events/idea2010/?s=9) in Winter 2024. **Organizers:** George Caridakis (gcari(a)aegean.gr) Joel Lanir (ylanir(a)is.haifa.ac.il) Laura Makary (laurasmakary(a)gmail.com) Maristella Matera (maristella.matera(a)polimi.it) Houda El Mimouni (helmimo(a)iu.edu) Valentina Nisi (valentina.nisi(a)tecnico.ulisboa.pt) Giuliana Vitiello (gvitiello(a)unisa.it) --- Prof. Giuliana Vitiello, PhD Director HCI-UsE Lab Department of Computer Science University of Salerno Italy phone +39 089 963317 cell +39 3666758965 https:// <https://docenti.unisa.it/003730/home> docenti.unisa.it/giuliana.vitiello

2 years, 1 month

1
0
0 0

[ACM IUI 2024] 2nd Call for Posters and Demos

by Wanling Cai

* We apologize if you receive multiple copies of this CfP * * Online version: https://iui.acm.org/2024/call_for_posters_demos.html **ACM IUI 2024 - Call for Posters and Demos** 29th International ACM Conference on Intelligent User Interfaces (ACM IUI 2024) Greenville, South Carolina, USA, March 18-21, 2024 https://iui.acm.org/2024/ ACM Conference on Intelligent User Interfaces (ACM IUI) 2024 is the 29th annual premiere venue, where researchers and practitioners will meet and discuss state-of-the-art advances at the intersection of Artificial Intelligence (AI) and Human-Computer Interaction (HCI). Ideal IUI submissions should address practical HCI challenges using machine intelligence and discuss both computational and human-centric aspects of such methodologies, techniques, and systems. We welcome contributions from related fields such as psychology, behavioral science, cognitive science, computer graphics, design, the arts, and more. Our focus is to improve the interaction between humans and machines, by leveraging both HCI approaches and state-of-the-art AI techniques from machine learning, natural language processing, data mining, knowledge representation and reasoning. ACM IUI welcomes contributions from all relevant arenas, academia, industry, government, and non-profit organizations, and gives its participants the opportunity to present and see cutting-edge IUI work in a focused and interactive setting. **Posters** Posters provide an opportunity for sharing valuable last-minute ideas, eliciting useful feedback on early-stage work and fostering discussions and collaborations among colleagues. We invite submissions relevant to all conference topics. All submissions should convey a scientific result or work in progress that is not yet ready to be published as a full-length research paper at a refereed conference. The page limit for poster papers is 7 pages (references do not count toward the page limit). Submitting a draft poster along with your submission is not required but is recommended. Accepted poster papers will appear in the companion proceedings of the conference. Each accepted contribution is expected to be presented in person. **Demos** The demonstration track complements the overall program of the conference. Demonstrations show implementations of novel, interesting, and important intelligent user interface concepts or systems. We invite submissions relevant to intelligent user interfaces and which address, but are not limited to, the topics of the conference. All submissions are intended to convey a scientific result or work in progress and should not be advertisements for commercial software packages. The page limit for demo papers is 4 pages (references do not count toward the page limit). Authors further need to submit a video (max. 5 mins) along with their demo paper to showcase their work. Accepted demo papers will be presented as interactive demonstrations at IUI and published in the companion proceedings of the conference. Each accepted contribution is expected to be presented in person. Authors who submitted a long or short research paper are welcome to also propose a demo of their work to exemplify their work at the conference. **Submission Instructions** Up to 4 (Demo) or 7 (Poster) page paper (references do not count towards the page limit). Demo and poster submissions do not need to be anonymized. Submissions should follow the ACM Master Article Templates in a single column format. * We will adopt the ACM TAPS Workflow<https://www.acm.org/publications/taps/word-template-workflow>. * Prepare your submission for review in a single column format, using the latest templates: Word Submission Template <https://authors.acm.org/proceedings/production-information/preparing-your-a…> , or the LaTeX template <https://authors.acm.org/proceedings/production-information/preparing-your-a…> using \documentclass[manuscript,review,anonymous]{acmart} for the LaTeX template. Authors are required to include a proper classification for the paper according to the ACM Classification System (CCS). Additional information on how to use it is available at: https://dl.acm.org/ccs/ccs.cfm A video (up to 5 mins) is required for demo submissions. The video should showcase the system that will be demonstrated during the conference. Please follow the SIGCHI Technical Requirements and Guidelines for Videos.<https://sigchi.org/conferences/author-resources/video-guide/> Please submit your demos and posters at http://new.precisionconference.com/~sigchi under the IUI 2024 Demos and Posters track. In PCS 2.0, first click "Submissions" at the top of the page, from the dropdown menus for society, conference, and track select "SIGCHI", "IUI 2024" and "IUI 2024 Demos and Poster", respectively, and press "Go". ** Important dates (AoE) ** * Submission - January 9, 2024 * Notification to authors - January 30, 2024 * Camera-ready - February 8, 2024 Poster and demo chairs (posters2024(a)iui.acm.org<mailto:posters2024@iui.acm.org>) * Marko Tkalcic, University of Primorska * Hanna Hauptmann, Utrecht University

2 years, 1 month

1
0
0 0

[ACM IUI 2024] 2nd Call for Doctoral Consortium Submissions

by Wanling Cai

* We apologize if you receive multiple copies of this CfP * * Online version: https://iui.acm.org/2024/call_for_doctoral_consortium.html ** ACM IUI 2024 - Call for Doctoral Consortium Submissions** 29th International ACM Conference on Intelligent User Interfaces (ACM IUI 2024) Greenville, South Carolina, USA, March 18-21, 2024 https://iui.acm.org/2024/ ** Overview ** The IUI 2024 Doctoral Consortium (DC) provides students an opportunity to present and receive feedback about their research in an interdisciplinary workshop, under the guidance of a panel of mentors selected from senior researchers in the field. We invite students who feel they would benefit from this kind of feedback—the ideal participant is a doctoral student about two years from finishing their Ph.D. We will also consider advanced Master's students and junior Ph.D. students provided their research plan is sufficiently developed to benefit from the discussion at the DC. Submissions will be selected by the DC chairs and potentially other reviewers. The strongest candidates will be those who have a clear topic and research approach and who have made some progress, but are not too far along in their research so that they can still reshape their research topic or approach. The final version of accepted Doctoral Consortium submissions will be included in the main conference proceedings published in the ACM Digital Library. The Doctoral Consortium workshop will take place as a separate session in parallel to workshops and tutorials, and DC participants will have the opportunity to present their research in the poster session during the main program. Complimentary/reduced conference registration will be available for students. Doctoral Consortium participants will also be given high priority when applying for the student travel awards, under the precondition that they agree to assist as student volunteers in the organization of the event. ** Objectives ** The objectives of the Doctoral Consortium are to: * Serve as a supportive setting to provide/receive feedback on students' current doctoral research as well as guidance on future research directions; * Offer each student comments and fresh perspectives on their work from researchers and students outside of their own institution; * Promote the development of a supportive community of scholars and a spirit of collaborative research; * Contribute to the conference goals through interaction with other researchers and conference events. ** Submission Instructions ** If you are unsure about eligibility or submission requirements, please do not hesitate to email us at dc2024(a)iui.acm.org<mailto:dc2024@iui.acm.org>! To apply for the Doctoral Consortium, two steps are required: Please submit a single PDF containing your technical submission (for details see below) via PCS by January 9. In addition, your doctoral or thesis advisor should send a separate, brief letter of recommendation to the DC chairs at dc2024(a)iui.acm.org<mailto:dc2024@iui.acm.org> by January 12. For the technical submission, please upload a single PDF containing the following four items to https://new.precisionconference.com/~sigchi by January 9, 2024: 1. Cover Letter (1 page max): Please include your full name, contact details, affiliation, web page, expected graduation date and target degree, the name of your thesis advisor, gender (optional), home country (optional), and whether you are a member of an underrepresented minority group (optional). 1. DC Submission (4 pages max including references) A document describing your thesis/dissertation topic and research plan and your progress thus far. Key points the submission should include: motivation for your dissertation research goal and research questions related work that frames your research methods/approach to reach the goal results, if any next steps for your research 1. Questions to mentors and co-students (1 page max): List the main questions and discussion points regarding your thesis/dissertation topic for which you expect to receive feedback from the Doctoral Consortium mentors/participants. 1. Your CV (3 pages max) Provide an academic curriculum vitae (CV) document. ** How to format and submit ** Prepare your submission for review in a single column format, using the latest templates: Word Submission Template , or the LaTeX template using \documentclass[manuscript,review,anonymous]{acmart} for the LaTeX template. All materials must be submitted electronically to PCS 2.0 https://new.precisionconference.com/~sigchi <https://new.precisionconference.com/~sigchi%22> by the Doctoral Consortium deadline. In PCS 2.0, first click "Submissions" at the top of the page, from the dropdown menus for society, conference, and track select "SIGCHI", "IUI 2024" and "Doctoral Consortium", respectively, and press "Go". ** Important dates (AoE) ** * DC Contributions Submission Due: Jan 9, 2024 Consortium Chairs (dc2024(a)iui.acm.org<mailto:dc2024@iui.acm.org>) * Paul Taele, Texas A&M University, USA * Jurgen Ziegler, University Duisburg-Essen, Germany

2 years, 1 month

1
0
0 0

Shaping the future of CHI - have a say NOW!

by Marta Cecchinato

Hi all, you might have seen on X or on SIGCHI mailing lists that the SIGCHI Steering Committee is looking for feedback from the community about how to shape the future of CHI. The reasons why CHI needs to change are outlined in these two posts: 1. https://chi.acm.org/finances-and-format-context/ 2. https://chi.acm.org/finances-and-format-shaping/ There are practical and financial reasons for these changes, but how it changes, is up to you too – so, if you haven’t already, please do have a say of what you think CHI should look like: https://www.surveymonkey.com/r/5XDGSCN The survey closes in two days on December 20th, so fill it out now! 😊 Hope you have a restful break and a good start to 2024! Marta (she/her) =========================================== Dr Marta E. Cecchinato (she/her) BSc (Hons), MSc, PhD, FHEA Assistant Professor in Computer & Information Sciences Departmental Athena SWAN Lead Northumbria University Office: room 307, CIS Building University profile<https://www.northumbria.ac.uk/about-us/our-staff/c/marta-cecchinato/> Personal website<https://cecchinato.me/> Support the #MyNameIs<https://mynameis.raceequalitymatters.com/> campaign. My name is pronounced [Mar-ta Check-inato] 🕑 I work flexibly, so whilst it suits me to email you now, I do not expect you to read, respond or take action outside of your own working hours. 🏳️‍🌈 Equality, diversity, and inclusion matter to me. Discrimination in any form is not okay. If you’re suffering discrimination, talk to me. This message is intended solely for the addressee and may contain confidential and/or legally privileged information. Any use, disclosure or reproduction without the sender’s explicit consent is unauthorised and may be unlawful. If you have received this message in error, please notify Northumbria University immediately and permanently delete it. Any views or opinions expressed in this message are solely those of the author and do not necessarily represent those of the University. Northumbria University email is provided by Microsoft Office365 and is hosted within the EEA, although some information may be replicated globally for backup purposes. The University cannot guarantee that this message or any attachment is virus free or has not been intercepted and/or amended.

2 years, 1 month

1
0
0 0

2026

2025

2024

2023

2022

2021

2020

Hcitaly